| Quantity | Price per item | Discount |
| 3 items | €96.00 | 3% off |
| 5 items | €93.00 | 6% off |
(f)air tightness® STANDARD is an economical airtightness and vapour control membrane designed for suitable internal wall, ceiling and roof constructions.
The membrane consists of a polypropylene nonwoven layer combined with a functional film. Installed on the warm side of the insulation, it helps limit uncontrolled air leakage and water vapour diffusion into the building structure.
With a nominal sd-value of approximately 10 m and a declared material air permeability of less than 0.004 m³/(m²·h) at 50 Pa, STANDARD provides effective vapour control and very low material air permeability when correctly installed.
The membrane is particularly suitable for supported internal airtightness applications where additional mechanical reinforcement is not required.
Width: 1.5 m
Length: 50 m
Nominal coverage: 75 m²
Allow for overlaps, trimming and detailing when calculating material requirements.
(f)air tightness® STANDARD is a practical and economical choice for supported internal airtightness and vapour control applications.
(f)air tightness® EXTRA features additional mesh reinforcement, increased mechanical strength and a higher nominal sd-value of approximately 20 m. It is particularly suitable for mechanically more demanding installations, including suitable applications involving mineral wool or blown cellulose insulation.
The appropriate membrane and fixing arrangement must be selected according to the construction, insulation weight, supporting structure and installation conditions.
Install the membrane on the warm side of the insulation according to the approved building-envelope design.
(f)air tightness® GREEN Tape
For suitable membrane overlaps and airtight connections.
(f)air tightness® OR Sealant – 310 ml
For suitable membrane perimeter connections to adjoining construction substrates.
Technical Disclaimer
Any installation details or recommendations provided by Prodomo Ireland are intended as general guidance only and must not be considered as project-specific design approval. The technical feasibility, structural suitability and compliance with applicable building regulations must be assessed and approved by the appointed architect or structural engineer before implementation.
| Property | Value |
| Product | (f)air tightness® STANDARD |
| Construction | Polypropylene nonwoven and functional film |
| Roll dimensions | 1.5 × 50 m |
| Nominal roll area | 75 m² |
| Water vapour permeability | 5–6 g/(m²·24 h) |
| sd-value | Approx. 10 m |
| Material air permeability at 50 Pa | < 0.004 m³/(m²·h) |
| Reaction to fire | Class E |
| Water-tightness | W1 |
| Mass per unit area | Approx. 80 g/m² (±5%) |
| Tensile strength – MD | ≥ 160 N/50 mm |
| Tensile strength – CD | ≥ 120 N/50 mm |
| Tear resistance – MD | ≥ 100 N |
| Tear resistance – CD | ≥ 100 N |
| Temperature range | −40°C to +80°C; +100°C for limited exposure |
| UV resistance | Up to 2 months under specified laboratory ageing conditions |
| Product standard | EN 13984 |
MD = machine direction; CD = cross direction. Technical values according to the (f)air tightness® STANDARD Technical Data Sheet. Refer to the current Technical Data Sheet and Declaration of Performance for complete product information.
Technical specifications for the STANDARD membrane, including vapour resistance, air permeability, mechanical properties and material characteristics.
Download Technical Data Sheet (PDF)
Declaration of Performance No. 1-1122015-40, dated 29 April 2020.

