Power FIX hybrid polymer adhesive for thermal structural supports, 600ml
5.0
1 review
Reviews from verified customers who have purchased products at this store.
€18.50
In stock
Save this product for later
Customer reviews
Reviews only from verified customers
Reviews are only accepted from verified customers who have signed in and purchased the products. This ensures that each review is based on genuine customer experiences. All reviews are checked before publication to prevent spam.
Graham B.
Pallasgreen,
Ireland
09.12.2024
Great product for use with the thermal supports.
Also useful to seal tears in vapour barrier and holes in blockwork.
Power FIX hybrid polymer adhesive for thermal structural supports, 600ml
Product Details
The Power FIX adhesive is required to bond the thermal structural supports to the substrate for securing load transfer and sealing. It can be also used for sealing between the supports and the window/ door frame.
Every window bracket requires 2 beads of mastic, as shown in the second photo. A tubular caulking gun for 600ml sausage bags is required.
One tubular sausage bad caters 4 -5 lengths of Triotherm+ structural supports (1,175mm long)
Product benefits
• Outstanding initial adhesion on various substrates
• High-performance sealing
• Weather and UV-resistant, non-fading
• Exceptional final adhesion (320 kg/10 cm2)
• Moisture and temperature resistant
• Silicone, Isocyanate, solvent, halogen and acid-free
• Non-corrosive
• Suitable for all standard construction surfaces*
• Building material class B2 (DIN 4102)
• Tested to be very low in pollutants according to EMICODE EC1 Plus
* We always recommended to do a pre-test upfront, by bonding a sample piece of approx. 250mm length to the substrate and check the bonding performance after 48 hours
You May Also Like
Bestseller
Thermal Support, 70/80/100/120/140mm x 85mm x 1,175mm
Thermal Support, 70/80/100/120/140mm x 85mm x 1,175mm
Passive House Certified Component
5.0
(2)
€33.50
Display prices in:EUR
